VRCI Electronic Vacuum Switch ● Piezo ● 1200 to 1 mbar

Name: VRCI Electronic Vacuum Switch ● Piezo ● 1200 to 1 mbar
SKU: VRCI
Price: 383.00 EUR
Availability: InStock

€ 383.00 excl. VAT and transport costs

The electronic vacuum switch VRCI with inverted switching logic functions as safty switch or for direct switching of pumps or valves in rough vacuum. Due to the additional output of a measuring signal, a process can be monitored without any problems.

Compare

Request a quote

SKU: VRCI Category: Vacuum switches Tags: 1200 - 1 mbar, Piezo, Vacuum switch

Weight	1.1 kg
Dimensions	25 × 16 × 9 cm
Measurement principle	Piezo resistive
Set-Point Range	5-1200 mbar
Gas dependency	independent of gas type (Piezo)
Materials in contact with vacuum	Stainless steel, 1.4305, Al₂O₃, ceramic, FKM (FFKM on request)
Accuracy	+-0.3% full scale
Response time	< 20 ms
Voltage supply	18 – 30 VDC
Electrical connection	Phoenix screw terminals
Power consumption	Without relay 50 mA, with relay 70 mA
Operating temperature	0…+40°C
Storage temperature	-10…+60 °C
recorder output	0-1 V or 0-10 V; 5mA
Switch Point	Switch Point 20 hPa/Hysteresis -7 mbar (standard, others on request)
Vacuum connection	Stainless steel DN 16 ISO-KF, G1/4 female thread
Protection class	IP54
Weight	Approx. 450 g

Vakuum Switches

What does “piezoresistive” mean?

By changing the pressure, a thin membrane deforms on which a resistor bridge is mounted on the rear. These piezoresisitive resistors change with strain and pressure. The resulting deformation is used to measure the absolute pressure.

How to set the switching point?

After the disassembly of the case which prevents accidental adjustment, the setting of the switching point is done with a potentiometer. The value of the switching point is displayed as a 0-1V analog signal for control purposes.

Can you display the measurement values?

Yes, the measurement values are displayed as a 0-10 V analog signal.