- Temperature compensated, metal sealed Pirani sensor with durable helix filament
- Vacuum connection by small flange DN16 ISO-KF
- High accuracy
- Excellent repeatability
- Superior sensor protection against condensed solvents
- High battery life due to clocked measurement
- Gas correction factors for immaculate pressure readings
VD83 Compact Vacuum Meter ● Pirani ● 100 to 5e-4 mbar
€ 479,00 excl. VAT and transport costs
The versatile VD83 digital vacuum meter with data logger and USB interface measures absolute pressure in the fine vacuum range.
- Operation with battery or power supply for mobile use and fixed installation
- Display for direct reading of measurement data
- Data logger: save up to 2000 measurements in the vacuum meter
- Versatile and easy to use
- Operating modes: continuous operation for long-term measurements
or automatic switch off for battery saving
- Setting option: storage of minimum and maximum pressures
- Long battery lifetime thanks to clocked measurements
- Pressure units mbar, Torr, hPa
- USB interface for easy push button data transfer to PCs,
but no PC connection is necessary during measurements
- Easy configuration and readjustment of the vacuum meter by VacuGraph™ software
or directly on the gauge
- VacuGraph™ Windows software to visualize, analyze and save measurements
|Dimensions||12 x 6 x 4.7 cm|
Heat conduction Pirani, depending on gas type
|Materials In Contact With Vacuum||
Stainless steel 1.4307, tungsten, nickel, glass
100 – 5e-4 mbar (75 to 5e-4 Torr), max. overpressure 4 bar absolute
100 – 10 mbar: 1 mbar; < 10 mbar: 2 digits mantissa, 1 decimal place
100 – 20 mbar: < ±30% from reading, 20 – 2e-3 mbar: < ±10% from reading
1.0 s (0.1 s if logging rate is set accordingly)
|Data Logging Rate||
+5 °C…+50 °C
-20 °C…+60 °C
9 V block battery or 12… 15 VDC external
Mini-jack 2.5 mm for plug-in power supply
Approx. 110 mW (clocked)
Sensor integrated in the instrument
Stainless steel small flange DN 16 ISO-KF
LCD 12 mm
What is the Min/Max memory functionality?
Extreme values (minimum and maximum pressure) recorded during the measurement process are stored directly in the instrument and can be shown on the display when the measurement is complete.
Is it possible to place a VD8 compact vacuum meter directly into the vacuum for measuring?
Yes, our VD8 compact vacuum meters can be directly placed into a vacuum chamber. With their data logger functionality the measurements are stored and can be sent to a PC for evaluation, when the measurement is complete.
What happens with the instruments’ parameters or stored data when the battery is changed?
A memory chip, which works independent from a battery, is used for storage of measurements and the instruments’ parameters. However, the extreme values (Min/Max memory) will be lost when the battery is changed. Poor battery power is indicated by the “BAT”-prompt in the upper left corner of the display. The device can still be used.
Is the battery included in the shipment?
The instrument can be operated on batteries, rechargeable batteries, or with an external power supply. These items are available as optional accessories.
What battery types are suitable for VD8 compact vacuum meters?
We recommend 9 V alkaline batteries. Alternatively 9 V lithium batteries or 9 V rechargeable batteries can be used. Zinc coal batteries are not suitable for the VD8, due to its high internal resistance.
How often do I need to recalibrate the compact vacuum meter?
This depends on the specific application. Especially if there are coatings and contaminations on the sensor-head or if it is used in extreme temperature conditions it can be necessary to readjust the instrument. For quality assurance matters, we recommend to return the instrument for calibration every one or two years. We can offer a works calibration (item no. ADJCERT) or a DAkkS calibration (item no. DKDCERT).
Do I have to mount the instrument into a specific position?
Basically the instruments can be mounted in every position. The best accuracy is achieved if the flange of the instrument is mounted horizontally, because the instruments are calibrated in this position. Also it is not recommended to mount the sensor at the bottom of a pipe, because condensate and dirt could be collected in the sensor cell.
What possibilities for data storage are available with VD8?
With the integrated data logger up to 2000 measurements can be stored in the instrument and sent to a PC when the measurement is complete. Alternatively the data can be sent and evaluated with the PC during the measuring process (online measurement).
What use is the functionality “Data logging at measurement change” ?
To optimally use the memory, especially for long term measurements, the VD8 offers the functionality “Data logging at measurement change”. Measurements are only logged if the pressure changes, thus reducing the amount of insignificant data.
What is the difference between the VD83 and the VD84?
The VD83 has the flange mounted directly at the rear of the unit, while the VD84 has a external pirani-sensor, which is connected to the unit via a spiral cable. The VD83 offers a bigger measuring range and slightly better accuracy, the VD84 offers higher flexibility due to the sensor head which can be unplugged.
Is the Pirani sensor protected against pollution and dirt?
All Thyracont pirani sensors are fitted with a cover which protects against basic condensation and pollution. If the sensors are used in an extremely polluted environment, it is advised to additionally either use an extension pipe, an elbow fitting, a cooling trap or a seal ring with a sinter filter.
Is the VacuGraph® software required for using a VD8 compact vacuum meter?
No. The VacuGraph® software is only required for the communication between a PC and vacuum meter. So you can e.g. transfer the measurements stored in the data logger to a PC for evaluation or you can change parameters, like the sample rate, comfortable in the configuration board of the software.
- VD8ZUB – Accessory Set
Package Deal! Accessory set for VD8
- VD8ALK – Alkaline Blockbattery 9V
For VD8, 6 LR 61, 9V/500mAh
- VD8ANS – Connection Set
– 1 pc. ZTA016 DN16 ISO KF T Piece, aluminium
– 2 pc. ZZR016 DN16 ISO KF Centering Ring, stainless steel / viton
– 2 pc. ZSR1016 DN10/16 ISO KF Clamp, aluminium
- VD8CASE – Protective Plastic Case
With foam protection for VD81, VD83,VD84, VD85, 270 x 202 x 80 mm
- VD8N4 – Plug-In Power Supply 15V
Input-plug: AC-change-over plug EURO, US, UK, AUS
- VGR – VacuGraph Software
Measurement software for THYRACONT gauges with serial interface
- WUSB0002 – Interface cable USB
- ADJCERT – Works Calibration
4 page documentation, 4 reference points per pressure decade, traceable to national DAkkS standards
- WVADJCERT- Works calibration with service contract
With 4 page documentation, 4 reference points per pressure decade
Duration: 5 years, annual inspection and worksadjustment, reminder
- DKDCERT – DAkkS Calibration