VRP Electronic Vacuum Switch ● Pirani ● 20 to 1e-3 mbar
€ 392.00 excl. VAT and transport costs
The VRP electronic vacuum switch can be used for directly switching a pump or valve in the fine vacuum range. An additional recorder output allows a continuous monitoring of the process pressure.
Weight | 1.1 kg |
---|---|
Dimensions | 25 × 16 × 9 cm |
Measurement principle | |
Gas dependency | depending on gas type |
Materials in contact with vacuum | Stainless steel 1.4307, tungsten, nickel, glass |
Measurement range mbar | |
Measurement range Torr | 15 – 1e-3 Torr |
max. overload | 4 bar abs. |
Accuracy | 20 – 1e-2 mbar: 10% f.r. |
Response time | 200 ms |
Voltage supply | 18 – 30 VDC |
Electrical connection | |
Power consumption | Without relay: 80 mA, with relay 100 mA |
Operating temperature | 0…+40°C |
Storage temperature | -10…+60 °C |
recorder output | 0 – 1 V or 0 – 10 V; 5 mA |
Switch Point | Alternating relay contact 230 V, 5 A, hysteresis depending on pressure range (e. g. 6% at 1 mbar, 34% at 0.01 mbar) |
Vacuum connection | Stainless steel small flange DN 16 ISO-KF |
Material Number: | |
Protection class | |
Weight | Approx. 450 g |
Description | Data sheet | Manual | 3D model |
---|---|---|---|
VRC Piezo resistive vacuum switch | VRC | ||
VRCI Piezo resistive vacuum switch | VRC | ||
VRP Pirani vacuum switch | VRP |
What does “piezoresistive” mean? By changing the pressure, a thin membrane deforms on which a resistor bridge is mounted on the rear. These piezoresisitive resistors change with strain and pressure. The resulting deformation is used to measure the absolute pressure. |
How to set the switching point? After the disassembly of the case which prevents accidental adjustment, the setting of the switching point is done with a potentiometer. The value of the switching point is displayed as a 0-1V analog signal for control purposes. |
Can you display the measurement values? Yes, the measurement values are displayed as a 0-10 V analog signal. |
Related products
-
Compare
VD83 Compact Vacuum Meter ● Pirani ● 100 to 5e-4 mbar
€ 544.00 excl. VAT and transport costs View Product -
Compare
VSL Vacuum Transducers for loadlocks ● abs. 1200 bis 1e-4 mbar ● rel. -1060 … +340 mbar ● digital
€ 652.00 – € 1,006.00 excl. VAT and transport costs View Product -
Compare
P_VD1253 ● Set VD12 with VSR53D ● Piezo/Pirani ● 1200 to 1e-4 mbar
€ 1,629.00 excl. VAT and transport costs View Product -
Compare
VSP Passive Vacuum Sensor ● 100 to 1e-3 mbar
€ 124.00 – € 127.00 excl. VAT and transport costs View Product
Further relevant products
-
Compare
SERVICESP customized pre-setting of switchpoint
€ 31.70 excl. VAT and transport costs View Product -
Compare
VRC Electronic Vacuum Switch ● Piezo ● 1400 to 1 mbar
€ 383.00 excl. VAT and transport costs View Product